Splicing Method

Core Alignment (Profile Alignment System)

Fiber Types 

Single Fiber

Average Loss

SM/MM/DS (dB) 0.02 / 0.01 / 0.04

Splice Time

17s (in high-speed mode) ; 20s ( in fine estimation mode )

Heating Time 

90s for 40mm sleeves; 110s for 60mmsleeves

Applicable Fibers

SM, MM, DS, NZ-DS

Coating Diameter 

250 or 900 micron

Recommended Cleave Length

16mm (5-20mm also possible)

Splice Programs

9 pre-installed; 23 customizable program slots

Sleeve Programs

4 pre-installed (for 40 and 60mmsleeves); 6 customizable slots

Splice Tension Test  

200g standard 450g (with modification)

Dimensions/Weight

11"L x 7"W x 7"H / 13.8 lbs.

Monitor

5" color, 264x magnification

Splice Memory

400 splices

V-Groove Illumination

Yes, LED

Power Supply                    

100-240 V, DC: 12V External Battery

Operating Environment 

Temp: 14°F -122°F; Humidity: 90% at100°F;  Alt:12,000ft.; Windproof to 30 mph

Storage Environment

- 40℃ to 140℃

Splice Data Output 

RS232C

Video Output  

PIN

Loss Estimation

Cleave angle, fiber end gap, core

Parameters 

eccentricity, offset, tilt, microbending, bubbling at splice point

Languages

9

Main Screen 

Operating message, arc counter,

Display

time, heater status, estimated loss, X- and Y-views （simultaneous)